Back to overview


WEB Design and quality assurance of intrinsic hybrid metal-CFRP lightweight structures

Wednesday (29.04.2020)
12:00 - 12:20 Room 2

The intrinsic production of metal-CFRP hybrid materials allows a load-path-optimal design of connecting components. The interface of the hybrid part is of particular importance in design, production, and testing due to its force-transferring function. The special feature of the intrinsic connection is a thermoplastic jacket around the metal insert. It dampens vibrations, inhibits corrosions, and smoothens the stiffness gradient in the between metal and CFRP. A punched metal insert guarantees the suitability for mass production in the automotive industry while the plastic jacket maintains a fiber adjusted geometry as well as a structured surface to maximize the joint strength. Load paths, stress distribution, and good drapability are taken into account. FE simulations and experiments are used to design and dimensioning the insert. Novel FEM visualization methods for constructive design are developed and applied. The investigation of design elements on the mesoscale (mm) and microscale (µm) surface roughness shows improvements of load transfer and reduces the damage propagation.

The intrinsic manufacturing is carried out in the RTM process. Inline quality assurance starts with the inspection of the preform geometry. The data from two laser light section sensors are used for inline measurements of complex 3D geometries. Ultrasonic sensors are used to check the curing degree of the resin during the infiltration. Afterwards, inline quality assurance of the finished hybrid component is carried out by data fusion of laser light section sensors and active thermography. The data fusion enables a three-dimensional representation of the thermographic image and thus also a three-dimensional defect localization.

Active and passive thermography are suitable for characterizing the component under various load conditions. Damages can be reliably detected using active thermography, while passive thermography allows the in situ observation of the damage propagation. This allows a detailed insight into the damage mechanisms under quasistatic and cyclic load. It is possible to predict the remaining service life of the component by observing the delamination growth under cyclic mechanical load.

The input of the inline quality information in combination with the damage characteristics into a FE simulation enables the prediction of the individual component performance.

Lucas Bretz
Karlsruhe Institute of Technology (KIT)
Additional Authors:
  • Fabian Günther
    TU Dortmund University
  • Hendrik Jost
    Saarland University
  • Michael Schwarz
    Saarland University
  • Vanessa Kretzschmar
    Leipzig University
  • Markus Pohl
    TU Dortmund University
  • Lukas Weiser
    Karlsruhe Institute of Technology (KIT)
  • Dr. Benjamin Häfner
    Karlsruhe Institute of Technology (KIT)
  • Dr. Jannik Summa
    Saarland University
  • Prof. Dr. Hans-Georg Herrmann
    Saarland University
  • Prof. Dr. Gisela Lanza
    Karlsruhe Institute of Technology (KIT)
  • Prof. Dr. Markus Stommel
    TU Dortmund University


Category Short file description File description File Size
Paper Version 2 1,017 KB Download